Struct lpc55s6x_pac::wwdt::mod_::R

pub struct R { /* fields omitted */ }

Value read from the register

Methods

impl R

pub fn bits(&self) -> u32

Value of the register as raw bits

pub fn wden(&self) -> WDENR

Bit 0 - Watchdog enable bit. Once this bit is set to one and a watchdog feed is performed, the watchdog timer will run permanently.

pub fn wdreset(&self) -> WDRESETR

Bit 1 - Watchdog reset enable bit. Once this bit has been written with a 1 it cannot be re-written with a 0.

pub fn wdtof(&self) -> WDTOFR

Bit 2 - Watchdog time-out flag. Set when the watchdog timer times out, by a feed error, or by events associated with WDPROTECT. Cleared by software writing a 0 to this bit position. Causes a chip reset if WDRESET = 1.

pub fn wdint(&self) -> WDINTR

Bit 3 - Warning interrupt flag. Set when the timer is at or below the value in WDWARNINT. Cleared by software writing a 1 to this bit position. Note that this bit cannot be cleared while the WARNINT value is equal to the value of the TV register. This can occur if the value of WARNINT is 0 and the WDRESET bit is 0 when TV decrements to 0.

pub fn wdprotect(&self) -> WDPROTECTR

Bit 4 - Watchdog update mode. This bit can be set once by software and is only cleared by a reset.